Friday, July 10, 2009

2010 Honda CRF250R Features and Benefits

Press Release from American Honda
Torrance, CA - Jul 10 —

Boasting an all-new, more powerful, more compact engine with Programmed Fuel Injection (PGM-FI) combined with an all-new Twin Spar Aluminum Frame featuring the Honda Progressive Steering Damper (HPSD), the 2010 CRF250R continues Honda's long-standing position of class dominance. This latest CRF250R sets a higher benchmark for impressive power and class-leading handling all rolled into one competition-ready package.

New for 2010

  • All-new, more compact engine.
  • Programmed Fuel Injection (PGM-FI).
  • Progressive Steering Damper (HPSD)-equipped aluminum frame
  • All-new front and rear suspension, featuring upper and lower fork tubes and a shock body developed exclusively for the CRF250R chassis.
  • Redesigned higher-capacity airbox for enhanced breathing and increased power also improves filter access.
  • All-new single-muffler exhaust system improves mass centralization.
  • All-new bodywork.

Engine/Drivetrain

  • All-new compact engine.
  • Liquid-cooled four-valve Unicam® 249cc engine.
  • Engine completely redesigned for improved power delivery from a significantly more compact package that lowers the center of gravity and enhances mass centralization for improved handling.
  • New forged slipper-piston material permits a thinner crown. Low-friction surface treatment ensures high-rev potential.
  • All-new Programmed Fuel Injection system (PGM-FI) utilizes a 50mm throttle body with 12-hole injector fed by lightweight 50-psi pump to ensure optimum fuel atomization and precisely targeted fuel charge. System also improves fuel consumption.
  • PGM-FI system monitors throttle position, intake air and coolant temperatures and manifold pressure to accurately map fuel charge and ignition spark, significantly improving partial-throttle response and helping to ensure excellent rideability.
  • AC generator enlarged to service the PGM-FI system. Two crankshaft position sensors quickly determine crank position to provide quick starts, hot or cold.
  • New mechanical water pump seal improves durability
  • Kashima coating applied to the clutch basket and clutch center improves clutch life and feel.
  • All-new transmission ratios match engine power output.

Chassis/Suspension

  • All-new HPSD-equipped Twin-Spar Aluminum Frame with forged-aluminum steering head. Spar height was reduced (70mm to 66mm) and width was narrowed (27mm to 26mm). Stronger downtubes improve front-end feel.
  • Steering response and overall handling were improved by positioning the front wheel 15mm farther back and closer to the crankshaft.
  • Frame, steering head and swingarm modifications permit a reduction in triple-clamp offset (22mm to 20mm).
  • Removable rear subframe was redesigned to eliminate brackets. Shape altered to improve air filter access and narrow the bike profile.
  • HPSD features a compact damper attached to the lower triple clamp and the steering head to allow more aggressive steering characteristics and assist straight-line handling. Damping action smoothly progresses as handlebar deflection increases, which produces very natural steering characteristics and feel.
  • Pro-Link® Rear Suspension features exclusive Showa integrated reservoir with all-new damping and spring settings.
  • Brake system integrates the rear master-cylinder and fluid reservoir, eliminating the separate reservoir and hose.
  • Link-type front-brake master cylinder and a lightweight brake rotor provide strong braking.

Additional Features

  • Engine stop switch features an integrated LED pre-ride check indicator. This confirms the PGM-FI system is operating normally.
  • All-new higher-capacity airbox improves filter access.
  • PGM-FI tuning connectors located behind radiator shroud for easier access
  • Redesigned larger radiators, improve cooling performance
  • New fuel-tank tether eliminates need to disconnect fuel line to work on top end.
  • Rider ergonomics are optimized by adapting the handlebar, seat and footpeg height to place the rider's legs at the narrowest part of the frame for improved comfort and handling feel.
  • Adjustable front-brake lever for improved control.
  • Quick-adjust clutch perch for easy cable adjustment.
  • Aluminum Renthal handlebar (971 bend) is rubber-mounted to help reduce rider fatigue and improve comfort.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.